BasicMicroUK - Forums

www.basicmicro.co.uk
It is currently Tue Jan 23, 2018 10:49 pm

All times are UTC [ DST ]




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
 Post subject: BasicMicro Studio 2.0.0.16
PostPosted: Sun Mar 18, 2012 5:32 am 
Offline
Site Admin
User avatar

Joined: Thu Mar 01, 2001 7:00 pm
Posts: 1316
Location: Temecula, CA
Current Release:
The current release of BasicMicro Studio is now available on the Downloads page of the main website. Please get the latest versions from there from now on.

BasicMicro Studio 2.0.0.17

First official release supporting the Orion Shield board.

Previous releases:
BasicMicro Studio 2.0.0.16

Fixed a bug in I2C commands for Atom/Nano.
Fixed a bug in Serial Parity handler on AtomPro
Fixed installer so it installs libraries on XP
Fixed large number SQR bug in AtomPro

Previous releases:
BasicMicro Studio 2.0.0.15

Fixes a bug in the Shiftout command on Nano/Atom processors. In previous versions if the 2 pins used for the shiftout command were on 2 different ports of the chip the output state of the data pin was not correctly set.


BasicMicro Studio 2.0.0.14

This update adds support for new versions of the Nano8 and Nano18 processors. All Nano8 and Nano18s shipped after 6/2/2011 must use 2.0.0.14 or newer.

BasicMicro Studio 2.0.0.13

Modified boot entry for old Atom modules(eg old Atom24m and Atom OEM modules).
FIxed a typo in TimerZ0 interrupt handler label
Fixed pacing in serout commands. Pacing was working but the delay specified was not being used.

BasicMicro Studio 2.0.0.11

Added AtomProDuino support, our new Arduino Shield compatible devboard. This will let you use most if not all the shields available with an AtomPro.
Library code for shields will be added soon.


BasicMicro Studio 2.0.0.9

Added Nano8 support. We will be releasing the Nano8 once we have some devboards that support it available.
Now includes the latest Manual(same as the new printed version).

BasicMicro Studio 2.0.0.8

Added a half bit delay after the last bit read in serin command. Without this command modifiers like dec,hex,bin where not working reliably. With the half bit delay added serin will always read to the begining of the first stop bit and then continue execution. Timing is approx 1-1/2 bit delays after the start bit to the first data bit, then 1 bit delay for each data bit and finally 1/2 bit delay to the first stop bit. This leaves 1 bit delay of time to exit the current serin command and execute another serin command for continuous reading.
Fixed a typo in the Debugin command library.

BasicMicro Studio 2.0.0.7

Updated Serin/out commands to support >115200bps. Tested and working upto 156250bps.
Please post any bug reports in the appropriate forum groups. Thanks.

BasicMicro Studio 2.0.0.6

Fixed HSerial on Nano/Atom
Changed ASIN/ACOS floating point functions on AtomPro. ASIN/ACOS now have the full range(-1.0 to 1.0) and produce results accurate to .00002(based on testing).

_________________
Tech Support
Basic Micro - Robotic Technology Evolved


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO